1sttimer
Over 1,000 Posts
Re: "Patina" The 1973 CB175 Cafe Racer
This is probably me not understanding. But if I knew I was rich, I would move the clip up to drop the needle to get it to the lean side if that diagram. I think...
But either way, per your and Teazers recommendation it's an easy switch to try both ends of the spectrum.
HerrDeacon said:Just looking back at my text and my wording may confuse a bit. By 'move it down a notch' I mean that the needle clip would be one notch lower (which raises the needle). I read teazer's response and realized how my wording may confuse so just wanted to clarify.
Here is a generic diagram to help.
![]()
This is probably me not understanding. But if I knew I was rich, I would move the clip up to drop the needle to get it to the lean side if that diagram. I think...
But either way, per your and Teazers recommendation it's an easy switch to try both ends of the spectrum.