small CL 360 project

I'm also learning a little bit about paint. I decided to do a light sand on the tank and re paint it. It had a little bit of orange peel. I wish I'd left it alone. I was out of the paint I used (rustolium appliance epoxy) and purchased Ace Brand applicance paint. I couldn't spray the stuff to save my life. I repainted twice and gave up. the stuff sucks. Ace is the only brand I could get local without a 30 minute drive each way. So I stripped the tank to bare. I re did all the body work and hit it with a few coats of primer. I decided to use base coat/clear coat rattle can. It looks even worse than my first attempt with appliance epoxy.
I've since decided to change colors. I plan to shoot it and the tail rustolium appliance silver. I found a real nice set of vinyl racing stripes (black)that I think will look real sweet. Hey JRK, how much time till I can re shoot the tank ? Also do i need to take it back to bare?
 
JRK5892 said:
i would take it back to bare! (congrads on the son) then give it at least 1 week before re coat.
I was afraid you were going to say that (back to bare). Wish I'd stuck with rustolium epoxy.
Thanks for the Congrads! He has worked his ass off for it. He is a 4.0 pre-med/Vet student. The only bad thing is Va Tech is 38k tuition/year.
 
yep! i know i work for a univ... just finished up my masters! thankfully they paid for it... i went to Mizzou UofM for my BA, so i know all about tuition and bills man, but hey it is worth it. i worked 3 jobs in school as i am sure he will as well... if he got in the FA dept will get him the funding he needs. always do...
best to just take it down to bare metal and do it right man... do it once do it right! my ride is coming, been so busy with customers stuff (not a bad thing at all!) check out one of my pattents... jsut made one for a customer this weekend:
http://www.youtube.com/watch?v=0jGYwuWw-jA
 
Fork Bag stereo is KicK Ass!! What a great idea. Sounds like it is plenty loud. Very user friendly too!
Hey man congrads to you too. Are you doing what you want or are you now looking for employment? I know that you've said that one day you'd like to just do bikes but I was wondering about now.
Yep he has worked full time in a vets office the whole time in school. So far he has paid for everything.
 
nice then he should snag up a job easy, plus chick did guys good with animals... i am doing what i like... the degree will open more doors for upper management for me plus they are paying so why not... some day i will do bikes full time... all in the works. but not for a few years. i have 2 buddys in mechanic shool for bikes that are going to come on after they are done, a prof airbrush/pin stripe guy, my powder, and paint... the 4 of us should make a good team. my website will be up some time or another. i did a bunch of work to a buddys bike and his G35 and htat is how he is going to replay me... 8 months ago... i always collect when owed so he and i talked this weekend he is going to get on it... it is cool though people around are recognizing the jackets and our t shirts... so that is tight... just sold a few t shirts to some buddies ( now i am out, have to get more made)
 
Sounds like you have a great plan. The word of quality work spreads fast and you already have a running start. You won't need that 9-5 for very long!
Hey man, Since I have 'light em up' LEDs I should buy a Tee. Let me know when you get more made and I'll buy one. Troy
 
Hey man, check out those spokes on my back wheel. They were pitted and rusty. Real pieces of crap! Now they look like chrome. I've been half tempted to just clear them. I'm not sure I can get them to look any better by painting them. What do you think?
 
On second thought, even if I can't get them to look that good, I think black will jsut look better.


Anyway, on another note, I know this is off topic, but I just found out that I'm going to see Cellofourte at a local club. I gotta throw some love their way and mention them here. If you've not heard of them they are a cello rock group from Pittsburgh Pa. One of the guys (Ben) plays a cello made in 1750. Pretty cool stuff. Gotta appreciate what they do even if its not your cup of tea. They have a pretty amazing resume you can read about them here: http://www.cellofourte.net/index.php/about
Check them out:
http://www.youtube.com/watch?v=kn7xR4odDk8&feature=PlayList&p=673BEA75F340100A&index=0
 
saw the weels man they look great! dig the video as well, used tto have a buddy that playd the fiddle all the time while i was in the garage biuilding, he coudl WALE on that sucker! i have a buddy that will come by and jam once in a while on his base guitar, lots of funk, cool shit, hell i get someone to hang out wiht and they get someone to listen to them jam, i dig any live music!
 
Just checking your build Troy, and I have to say it Kick ass tank good work on that and everything else. You just inspired me Im gettig a welder, nice fab work.

Also JRK your freakin generousity will pay you back tenfold nice to see you always helping everyone out.
 
Thanks guys. Imoale, I really like the fab part. Infact its my favorite part. The rest all seems like its uphill.
It's going pretty slow although I'm starting to get the itch. Spring is just around the corner. I've been all over this board hitting all the builds for inspiration. Lots of guys building some very cool bikes!!

JRK5892 said:
... used tto have a buddy that playd the fiddle all the time while i was in the garage biuilding, he coudl WALE on that sucker! i have a buddy that will come by and jam once in a while on his base guitar, lots of funk, cool shit, hell i get someone to hang out wiht and they get someone to listen to them jam, i dig any live music!
Love funk played on the bass guitar. Way cool stuff.
LOL my youngest son (17y/o)just bought a fiddle and cello. It sure is nice to have live music as you work!
He plays just about anything. He plays the piano mostly, but he also plays acoustic and electric guitar, and the trumpet. He records and mixes for all his friends so I quite often ge to hear a wide range of stuff. He just started to play the cello (3rd day) and I'm really digging it. He is self teaching and is just playing scales for now, but I can tell it won't be long. He takes piano lessons from two instructors and is studying Music composition at the University even though he is still a junior in hs. Great kid and fun to be around. Yeah, I'm a pretty lucky guy (I married the right girl. My kids get it all from her.)

IMOALE said:
Also JRK your freakin generousity will pay you back tenfold nice to see you always helping everyone out.
I agree!!!!!
Now back to those builds guys. Get on it!
 
BigBSBusa said:
That wheel looks great to me! Congrats to your son getting in to Va Tech. I know you are proud.
Thanks Big. It's good enough to just clear. I waffle back and fourth between painting or just clearing. Right now I'm on the fence. Clearing would be way easier though. Just depends on the look I guess.
Way Proud of my son. He is just a junior this year, so this means that he will skip his senior year. After one year in Vet school he will receive his undergrad from WVU. Odds were against him. Like I said over 500 applicants for 10 spots. He is an outstanding young man. Funny though, He could kick the shit out of just about anyone on the ice when he played hockey. He played major Junior in the Ontario Hockey League. Was tough as nails on the ice but a gentle giant off the ice.
Troy
 
all right, I should have seen this comming. I got some shitty stripper and it didn't work too well. The first can went on pretty heavy like it usually does, but then it quit spraying. I applied another can to the rest of the frame, tank and swing arm and it went on much thinner. You can see the two cans in the photo. The can to the left is what I always use but this was the last can the store had. It is the one that worked well, but then stopped spraying. The one to the right sucks!
DSC_0564.jpg



The front half came right off. But I had to use a wire brush on the drill for everything else. Its taking forever and its still not done.
DSC_0565.jpg


The stripper wouldn't even touch brand new paint! This is the tank after an hour with the wire brush on the drill. I hated to use the wire brush because I knew it would f up my body work.
DSC_0566.jpg
 
Made some major decisions over the past couple of days regarding paint and such. I fell in love with the looks of the '73 cl450 that Derek4 is doing. I stole parts of his paint scheme. I'm going to do the frame in epoxy silver then the tank and highlights will be black.

So today I got a little bit done. I finished the stripping of the frame and some smaller parts. I decided to paint the wheels JRK style. Spent a ton of time prepping. First hit them with paint stripper. Cleaned them, then sanded with 400. Cleaned them again. Then wiped them down with denatured alochol twice. The tape took the most time.
I decided to leave the nipples chrome.
DSC_0567.jpg






The damn thing looks like ceramic! I can't believe how good they came out. These pictures just dont do justice at all. I'm so glad I did this.
DSC_0569.jpg




Here is a close up, believe it or not the photos don't do justice. They look even better in person! Shiny and smooth. Looks like ceramic.

DSC_0571.jpg





I can't tell you how much better the rustolium paint flows than ACE brand. I tried two cans of ACE on my tank but it just wouldn't flow right. Now I can't wait to paint the tank, but first I need to do the frame, the front wheel and a bunch of small stuff.
 
Those wheels look phenomenal, I'm glad you're happy with it and you've saved a lot of time compared to my experience doing the same thing. My wheels look almost exactly the same, except I got like two or three spots where the paint lifted right off the surface and crinkled up because my garage was so cold when I sprayed. I'm still working on finishing up the trouble spots, two weeks after I started!!!
 
Back
Top Bottom