small CL 360 project

Represto said:
Interesting setup for the brake side rearset. How does it feel? The battery box looks great!

The brake feels very natural and is in a position where you can put a lot of weight on it if needed. I could lock the rear wheel without much trouble using 1 finger (no spring is used), while in the garage. So it should work, but I've not had the chance to really try it out ;). I did it before knowing how the bike would turn out. I'm kinda unsure about how it looks now. It is kinda getto fab.
Glad you like the box. I'm really digging it too. Troy
 
Ok, I have a couple of questions. First, Are the most rear set brackets cast or cut from solid stock? My guess is cast. Anyway, I was looking at the rear set I bought and the bracket would be too long to use it as is unless I cut my frame. So what if I cut the bracket down and re welded the mounts? Something like in the photo.
Second question, Will this clock work? It states that it is mechanically 12mm driven, 2:1 ratio (I think they also have 1:1 ratio). http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120380098154&_trksid=p2759.l1259
here is the rear set
rearset.jpg
 
looks great! most of them are cast... man i am not to sure about your guages man... i dont know... it should tell you in your owners or repair manual... what did you shoot the carbs with? looks like chrome paint... did you clear them with engine paint after that? the frame looks awesome in those photos... also dig the screen on the spades! YOU SHOULD TOSS SOME led'S BEHIND THAT TO MAKE IT GLOW!
 
Unfortunately I have a lot of stuff that I'm not sure why I bid on it sitting in my garage. I keep telling myself that I will need it someday and don't get rid of it. The carbs and screens look sweet! I've got to get off my butt and get some stuff done.
 
JRK5892 said:
looks great! most of them are cast... man i am not to sure about your guages man... i dont know... it should tell you in your owners or repair manual... what did you shoot the carbs with? looks like chrome paint... did you clear them with engine paint after that? the frame looks awesome in those photos...
Thanks guys. No manuals. I need to get myself one though.
Carbs are just high heat clear. I think they turned out real nice. I'm also real happy with the frame (paint quality and color) too. You've said it over and over, "its in the prep" (I can't thank you enough! I learned something). ;D.

"YOU SHOULD TOSS SOME led'S...", Haha, I'm with ya. I put a LED flash light back there last night and it looked sick. It blew me away.

Thanks again for the painted screen idea guys! It is a real nice surprise just under the seat ;D

BigBSBusa said:
Unfortunately I have a lot of stuff that I'm not sure why I bid on it sitting in my garage. I keep telling myself that I will need it someday and don't get rid of it.
LOL. I'm the same way. I'm a real pack rat. I love to collect shit thinking I'll figure a way to use it in some fashon that it was not intended. I find my self wondering around in hardware stores looking at stuff trying to figure out other uses.




Speaking of getting some stuff done.... I had water pipes going to the barn freeze last night. It was a real pain in the ass to get water for the horses and alpacas this morning. It wasn't all that cold at 16*F but tonights high is 3*F. Figure I'll try the turbo heater. If that doesnt work, I've got a bunch of digging to do :(
 
Spades look killer and carbs came out real nice Troy, well done.

On the cb450's 2:1 is what you want. Since the oem 450 and 360 clocks are nearly the same I'm thinking you'll be good with these. Also check out MikesXS.net, he carries a pretty good variety of these mini gauges too..

Funny thing about that rearset impulse buying thing. I did the same thing a few weeks ago! bought these, $15.00 shipped. I bought them mainly for the linkage, but I was also interested in examining the bearing setup. I like mine better :). I won't be using the brackets at all so if you need another set to mess around with just let me know.
 
Herm21 said:
Spades look killer and carbs came out real nice Troy, well done.

On the cb450's 2:1 is what you want. Since the oem 450 and 360 clocks are nearly the same I'm thinking you'll be good with these. Also check out MikesXS.net, he carries a pretty good variety of these mini gauges too..

Funny thing about that rearset impulse buying thing. I did the same thing a few weeks ago! bought these, $15.00 shipped. I bought them mainly for the linkage, but I was also interested in examining the bearing setup. I like mine better :). I won't be using the brackets at all so if you need another set to mess around with just let me know.
Thanks for the props. I'm pretty happy with it all.
And again thanks for the info on the clocks and mikes link. I'll check them out
Impulse buying will kill my budget so i have to watch it. Rear sets at $15 shipped is a killer deal. It would have been hard to pass up. Do you have any of the other parts from them left? Btw I like your sets much better too. No question! (Hey that sounds bad, but you know what I mean!)
 
yo Troybuilt, Nice build so far! Are your using a stick welder? If so, really nice welds! Stick stlye ain't easy! Was wondering how you are going to attach your tag (license plate)? can't think of any ideas for mine.
NATE
 
Hey Nate, Thank you very much. Yeah I'm using an old buz box. My ol man taught himself how to weld with it back in the 70s and passed it on to me about 10 years ago.
I plan on using flat 1" flat stock and using one of the shock bolts. I plan on running it longways and will be lighted with two LED bolt lights. I think it will be just an 'L' bracket. Won't be anything fancy, but will work. Someone on this forum just did about the same thing, but I can't remember who it was. I lurke on so many of the builds that go on here that sometimes its had to remember who did what :) Troy
 
A quick up date. I'll post a few photos later.
I got a whole bunch of stuff in the mail. Some of it's mounted, some not:
-New battery (5ah but its tiny tiny) from Advance battery $14.00+$10 shipping ;D
-New style rectifier (very nice) came with the plug, but I should have ordered the one with the longer plug because now I'll have to extend wires.
-Rear set that i'm selling $40 impulse buy :(
-new speedo, that I'm fabing up a mount to tuck it away.
-Headlight bucket that I just 'f'd up with paint stripper. (don't use aircraft stripper on plastic) :'( Anyone have an extra bucket that they want to get rid of cheap?
-Headlight ears
-VW beetle mufflers from jc whitney (not received them yet)
-Front wheel is painted (came out killer)
-spent a bunch of time going through the wiring harness. I found a couple of wires that were burnt. Traced it back to a wire that was pinched to ground inside the case. Later I found a total of 6 burnt wires. Fixed with solder and heat shrink.
-Cleaned and mounted the coils.
-Making a hinge for the seat.
 
Decided to go with a brushed look.
DSC_0755.jpg



Made a mount for the speedo. And mounted the headlight ears. Bucket is my old one that I hope not to use.
DSC_0758.jpg

DSC_0759.jpg



Front wheel turned out real nice. Left some of the tape on while I mounted it up.
DSC_0762.jpg



More brushed look with the rear brake etc... My son convinced me to keep the brake as it is. Said that I was weighing in the cost and not the ingenuity.
DSC_0763.jpg



Mounted the new rectifier, the coils, and the fuse panel....
DSC_0765.jpg



Front wheel brake side. Still need to brush the wheel with scotch pad.
DSC_0773.jpg


Bike back on two feet
DSC_0777.jpg
 
As you can see I've been wiring. the factory harness sucks. some wires are too short (because I moved things) while others are too long. Right now I'm going through and shortining wires and lengthening others. I hate It!
I'm considering tank and tail colors. I think I want to use black with a black and silver checkered stripe or silver with a black and silver checkered stripe. What do you guys think??
 
Your bike is turning out much cleaner than mine! You're much more patient than I am... It's looking really solid! Really good stance, super clean details.

I have the manual in PDF form-- I can put up on an FTP for you to download if you want it. What are you using for the brake pedal?
 
The bike is looking real good. I bet it feels good to get it back together to that point. I can't wait to get my frame stuff done so I can start getting it all back together.
 
Much thanks guys. Funny how this build thing goes. I'd planned to not do much, then ...
Anyway, I hope I'm over the hump. I hate doing this wiring. Wish I had the know how to do it from scratch. Seems there is so much in the factory harness thats not needed.
SausageMahoney said:
Your bike is turning out much cleaner than mine!
give credit where credit is due. Your build looks fantastic!
SausageMahoney said:
I have the manual in PDF form-- I can put up on an FTP for you to download if you want it.
Just found this from Leon: www.dotheton.com/downloads/CB360T.pdf But thank you anyway.

SausageMahoney said:
What are you using for the brake pedal?
Flipped this over
DSC_0161.jpg


Cut the middle out of the brake lever and welded the foot back on. Seems to work very well.
 
Troy and Sausage, you guys are working two of the coolest bikes on here. can’t wait to see when they are done.

jay
 
Back
Top Bottom