Search results

Doesn't appear so I will check in an hour, yeah that seemed like the best bet. Need to find someone who has done it before, considering I am sure I had a part in stripping it in the first place when I replaced the shocks. Although I will research the living sh*t out of how to do it and maybe I...

Hey guys so I am in a complete loss of what to do. My rear shock bolts are striped completely the bushing is slipping and the acorn is like a cap doesn't really screw down at all. The bolt is welded to the frame so I can pull it, I am very limited on tools. What are my Options?? Was...

Hillsy took the tank off and found the plug, Seams the neutral wire is the blue as it connects to the neutral indicator light. So I can just crimp those wires as low as possible and secure the blue wire better to the harness backbone. This is what I did before and well, looks like garbage...

Thanks Hillsy, the PO or the POPO made a mess of the electric. I am cleaning it up before I put in a new RR and Stator. I am doing as much if the smaller electric myself since it's my first time and might have the mechanic do the RR and stator.

Thanks I am an idiot

When you say cut off the wires from the sender, you mean just keep the neutral wire attached to the switch and get rid of all the others?

Hey guys I removed the gear indicator lights when I took the dash out, I kept the turn signals highbeam oil and neutral from the main Console. I'm redoing the electric and previously I had just crimped off the ends of those wires I'm looking at this diagram can I remove the entire wire from that...

Relocated battery box and changed the Airbox (it had a crack in it). I am moving the electronics under the seat above the rear tire, working in a little tray. Happy with how it turned out and the uni with the curved coupling is operating pretty good so far but haven't actually taken it for a...

I mean I have a lead from the - to the frame now, but I am relocating the battery

I have that connected to the frame, is it a good idea to use the same bolt to hold multiple grounds?

Thanks appreciate it, the PO made a mess of the electric. It's been connected to the - terminal and i am sure bolted to the engine as well its secured. Thanks appreciate it,

Hey guys I don't have an issues on my 81 Suzuki GS 450 with charging and I'm taking the battery out right now I noticed this wire coming out of the engine was connected to the negative lead on my battery. I've been having charging issues for a while and I'm wondering did my mechanic put one...

Thanks a lot for the advice guys let you know how it goes

How do you go about that though?

Yeah makes sense, most likely that's it

1981 Suzuki GS450

The acorn it's just seems to spin and not come off, it can somewhat be tightened but seems like there is an issue there

Yeah I can't get it off? It is making me insane to the point of unnecessarily taking it to a shop

Well those are pretty cool

That's it exactly