Yes another but all mine 75 CB360 Build

[Toyotacrawler]

Just some pics on this very nice day!

 

[crazypj]

Cut the clip on's down to about 26~27". 30+ is way too wide for a narrow bike like 360 ;D
I was going to suggest tube nuts but xb33 got there first 8)

 

[Toyotacrawler]

Haha ok.
I was wondering if anybody had any measurements for wheel travel @ the rear. I know this will vary due to rider weight. I don't want to run into tire scrubbing issues after I weld the hoop on. Should I just sit on it and crank some straps down on the rear? What is the best way to determine this measurement? I will be running stock tire size. NO oversize stuff!!

 

[Sonreir]

Pull the springs off the rear shocks and they'll fully compress to where you can measure everything.

 

[Toyotacrawler]

Pull the springs off the rear shocks and they'll fully compress to where you can measure everything.

That's great idea thanks!!!!!! Should have asked sooner

 

[crazypj]

I think fully compressed shock is either nine and a half or nine and three quarters long.
I have an adjustable 'strut' I use to check for tyre/wheel interference
Haven't had anyone ask for a while

 

[Toyotacrawler]

Been a little while since an update but I've been really busy lately and haven't had a lot of time for the garage. There has been an addition to the garage though. My wife's been wanting a bike ever since she sold her last one. We picked this 09 Duc M696 today. Only 3400 miles on the clock. Very clean bike and couldn't pass it up.

 

[irk miller]

Rumor has it they look better with a shitload of carbon fiber.

 

[crazypj]

...............and smaller silencers (in carbon ;D )

 

[Toyotacrawler]

Rumor has it they look better with a shitload of carbon fiber.

Haha definitely agree! We've already been looking

...............and smaller silencers (in carbon ;D )

You read my mind!

 

[Sonreir]

I have no idea what you guys are talking about...

 

[Toyotacrawler]

HAHA Sweet Monster! 8)

 

[Toyotacrawler]

Another new addition to the garage.

 

[Toyotacrawler]

Finally getting a chance to weld this frame hoop on.

 

[Toyotacrawler]

Once I smooth the welds down and I'll be done with this step.

 

[Toyotacrawler]

I'm satisfied with the result.

 

[trek97]

could you post the link to the lights you used in the gauges?

btw its looking great.

 

[irk miller]

It looks awesome. Man, that rear tire is sweet!

 

[Toyotacrawler]

could you post the link to the lights you used in the gauges?

btw its looking great.

Thanks man!
I actually bought the gauge lights from radio shack. I stepped out for a minute but as soon as I get back to the house I'll take a picture of the package.

It looks awesome. Man, that rear tire is sweet!

Thanks! That's a high dollar NASA tire right there. I spared no expense

 

[trek97]

Thanks man!
I actually bought the gauge lights from radio shack.

thanks bubba thats all I needed to know..BTW they do offer similar ones in 12vdc

http://www.radioshack.com/12-volt-green-snap-in-lamp-assembly-with-bulb-2-pack/2720337.html#start=6