Search results

I know the bearings are the same dimensionally. I guess the only thing I am missing is if the axle diameters are the same and if the length of the steering stem will work on the CL100. Any help would be appreciated!

Just finished up my CB360 Cafe and started a new project. It's a little bit older and little bit different but it should be a fun little scoot when all is said and done. It is a 1948 Harley Davidson Model 125 (later dubbed "Hummer" after a successful Harley dealer). Picked her up in Maine via...

Enjoy. See the build here: http://www.dotheton.com/forum/index.php?topic=28020.0

Can anyone understand this writing style? Code? What the HELL http://oldmotorclassic.blogspot.com/2010/10/honda-cb100-1976-jogja-concept-daily.html

Alright fellas, here is the deal. I have a 74 360. Brand new rebuild. Timing was set, points and condenser replaced and set, and dyna coils. The bike currently runs but mostly on the right cylinder. Trouble is, no matter how I set the points I end up getting a huge FAT blue spark on the right...

This is going to be a condensed build thread. I've been lurking on this forum for quite a while and first off I want to personally thank all of you who have helped me with my project either directly or indirectly. I documented the whole process on my phone for my own purposes. I now realize that...

Looking for a front axle collar for a cb360G. Disk Brake type. Anyone have one or know the dimensions so I can make one??

If anyone can tell me the OD and the depth of the front axle distance collar for a CB360 that would be awesome. It's one of my last missing bits and it is discontinued. My plan is to turn one on the lathe because I don't have time to wait for one from Thailand or salvage!! Part # 44311-371-980...

Does anyone know if the dowel pins that sit in between the head and the cylinder (12mmx20mm on the 360) are the same size as the dowel pins on the 350 twin? If so, does the 350 have four dowels or just two. The schematics make it look like there are only two but I have a hunch the other two are...

I currently live in TX but I am moving back to MI. I bought a cb360 out of Oklahoma with NO TITLE. All I have is a bill of sale. What do I have to do to get this thing registered and titled here in MI? Is it even possible or will I have to buy a frame/junk bike with a title?