No big deal getting a copper gasket from Lani. Cheap enough to make sure it's right.
deviant said:With the best I could figure measuring up, I ordered .042" base and head gaskets from Lani. The next size up is .050".
The aftermarket replacement that I set it with in the pic above is .025". .042" is that number plus the distance that I had to make up. Lani lists .042" gasket for the 69mm on eBay, too. http://www.ebay.com/itm/HONDA-CB360-COPPER-HEAD-GASKET-69MM-X-042-1-06MM-THICK-/162066426976roflhat said:Is that the thickness of the stock gaskets?
This is true. It's actually what I did. I just noticed that listing this morning. I had no idea he was listing them on eBay now.crazypj said:You can contact Lani direct at
http://www.coppergaskets.us/. I think it saves a couple of bucks?
crazypj said:I never thought there would be more than 3~4 'in the wild' plus what I built for myself but pretty sure there are at least a few dozen by now? ;D
deviant said:The aftermarket replacement that I set it with in the pic above is .025". .042" is that number plus the distance that I had to make up. Lani lists .042" gasket for the 69mm on eBay, too. http://www.ebay.com/itm/HONDA-CB360-COPPER-HEAD-GASKET-69MM-X-042-1-06MM-THICK-/162066426976