CB750 No Plunger Hellride Freedom Machine

irk miller

You've been mostly-dead all day.
DTT BOTM WINNER
Brodie said:
Why not sandwich the element between two screens. Looks good man.
That's probably what I'll do. It's what I did to ride it around last weekend.
 

2_DONE_THE_TON

Over 1,000 Posts
DTT BOTM WINNER
irk miller said:
Making some tweaks to the carb kit to get fitment with this frame. I couldn’t get enough clearance either inbound or outbound to get an air cleaner on the carbs, so I put the flange side down on the intakes to a belt sander and ground an angle to each side, then followed up with oil and sandpaper on a surface plate. The K&N style filters still don’t fit, so we’ll make our own. The plan is to add a Uni element under the screen, but I have to secure it to keep it from getting sucked into the carb.

nice ally tig welding :)
 

irk miller

You've been mostly-dead all day.
DTT BOTM WINNER
Well, it’s time to go crazy with the details. I don’t get to do this very often...

Etched my logo into the oil bag cap with a Celtic knot ring.




Sent from my iPhone using DO THE TON
 

Attachments

  • IMG_2095.JPG
    IMG_2095.JPG
    2.2 MB · Views: 1,197

irk miller

You've been mostly-dead all day.
DTT BOTM WINNER
Got some Biltwell grips to replace the Granturismo grips. I like these much betta. Also messing around with using springs to organize the wires. I may have to shorten the throttle so I can get it to run with the brake and clutch.




Sent from my iPhone using DO THE TON
 

Attachments

  • IMG_2104.JPG
    IMG_2104.JPG
    1.7 MB · Views: 218

Brodie

Gold Coast, Queensland
DTT SUPPORTER
They are my favourite style of grip. Actually shaped to fit your hand when it is closed.

Springs look good.
 

irk miller

You've been mostly-dead all day.
DTT BOTM WINNER
JustinLonghorn said:
Printed Circuit Board etching solution?
Circuit board etching solution is ferric chloride. I do use that on copper etching plates in printmaking. This is a saline etch: copper sulfate and salt.
 

irk miller

You've been mostly-dead all day.
DTT BOTM WINNER
Hahaha. You guys are hilarious. ::)

Vinyl, gum arabic, shellac, Sharpie marker, tusche, china markers, crayons, spray paint, etc are all used as a resist. For a perfect, crisp, vector type image, like on the cap and the logo on the end of the clutch lever, vinyl was used.
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom