Post a pic of your latest purchase

2ysurasu.jpg


Shinko 712's for my girls CB550
 
Mr_Dunev said:
Just picked this torque wrench up at the SWAP meet.



Great wrench. Now get it calibrated ;)

Seriously though, it should be fine but if you can... It doesn't hurt to gwt it checked.
 
You will need to have it calibrated
The ratchet mechanism will be fine but the torque settings will probably be withing +/-10% over full scale unless it's been re-set.
I was real surprised at the cheap Harbor Freightm1/2" drive torque wrench I was given a few years ago was actually accurate 8) (ratchet is rough as hell though) Need to get my 1/4" drive one checked and probably re-set
Snap-On only guarantee them 90 days, mechanical or electronic
Still well worth having, you'll probably get a load of use out of it
 
If you can find out when their truck is at a local shop, just drop in - they're generally good guys. Better salesmen, too, so bring your game face.
 
Last thing I needed was another project...but I couldn't resist!


90 vfr750 picked up sat night. Haven't even got a chance to get it out of my van. But it need carbs cleaned and it will run...400 with title and new battery!
 
Rich Ard said:
If you can find out when their truck is at a local shop, just drop in - they're generally good guys. Better salesmen, too, so bring your game face.

This is my game face :mad:

Thanks for the heads up ;)
 
Bobbed_out said:
Last thing I needed was another project...but I couldn't resist!


90 vfr750 picked up sat night. Haven't even got a chance to get it out of my van. But it need carbs cleaned and it will run...400 with title and new battery!

..............and about $900 for new gear trains if it's as bad as every one I've worked on ;)
 
Bought a boat, finally got delivered from San Francisco.. Pretty excited about getting her going for summer!

Was getting late so the last picture is dark.. But she's up in our yard and ready to look pretty again!

Sent from my HTC6500LVW using Tapatalk
 

Attachments

  • uploadfromtaptalk1390912359847.jpg
    uploadfromtaptalk1390912359847.jpg
    48.8 KB · Views: 182
  • uploadfromtaptalk1390912401030.jpg
    uploadfromtaptalk1390912401030.jpg
    71.7 KB · Views: 170
  • uploadfromtaptalk1390912460910.jpg
    uploadfromtaptalk1390912460910.jpg
    51.9 KB · Views: 169
nice sailer ! y'know what it needs is a smoker twin or triple runnin' that prop with some chambers stuck out the gunwale ;D
 
ronnie said:
Bought a boat, finally got delivered from San Francisco.. Pretty excited about getting her going for summer!

Was getting late so the last picture is dark.. But she's up in our yard and ready to look pretty again!

Sent from my HTC6500LVW using Tapatalk

Watch out for Pirates!!
 
I wasn't expecting a boat that big. It's time for you guys to think up some boat names for Ronnie.

I'll go with with the Finding Nemo boat name.. "The Butt"
I'm sure these names will turn dirty real quick haha
 
Re: Re: Post a pic of your latest purchase

Withers said:
party at ronnie's this weekend!

That's a fine ass boat.

Haha! Thanks, not ready for parties yet, summer is my goal!


crazypj said:
Two best days of your life, the day you buy a boat and the day you sell it ;D

I have ties two at least 3 hotter boats but this one is all mine! I know that saying though, true always..

xb33bsa said:
nice sailer ! y'know what it needs is a smoker twin or triple runnin' that prop with some chambers stuck out the gunwale ;D

HA! That would be a sight!

Mr_Dunev said:
Watch out for Pirates!!

Butt pirates? Like Justin and Richard...?

JustinLonghorn said:
Captain Ronnie. Captain Ronnie, can you hear me?

Roger that!

Drey6 said:
I wasn't expecting a boat that big. It's time for you guys to think up some boat names for Ronnie.

I'll go with with the Finding Nemo boat name.. "The Butt"
I'm sure these names will turn dirty real quick haha

Haha, yea it's not staying" serendipity", I have a few in mind but I need to work on her and it will come to me...

Sent from my HTC6500LVW using Tapatalk
 
Back
Top Bottom