Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
After a month and a half of waiting, I finally got my fat bike frame I ordered so I was able to build it up! The wheels/hub are too large for any commercial or shop grade truing stand, so I also decided to make a truing stand for it out of some extruded aluminum and some other little pieces of aluminum that I turned down and milled. It should also work with motorcycle wheels
Put together a three piece pivot axle for a FZ6 swngarm to fit a CB750K2 taking advantage of the FZ needle bearings. Not much of a project but a lot of thought went into it. this is not a good solution for a mono shock project.
Ah, do still have one of the final prototypes. There is a dowel pin that runs through the smaller piece, that clips in to the cut out on the top of the larger piece, is spring loaded.
Almost finished building a TZ350 motor -part of a complete rebuild/restoration.Now waiting for parts to arrive from UK and Europe and then some bits to go to the plating shop for new zinc plating.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.