On top of the piston.... Mix some air.... Oh wait we need fuel...damn it batman1sttimer said:Want me to tell you where on the crankshaft it sparks?
Sonreir said:You don't really need fuel if you mix the air at 3000 PSI.
Are both slides working1sttimer said:Took three pushes, fired right up and went right to the redline. Air screw?
cafe mike said:Are both slides working
What's your air screw adjusted at, from seat
That's why! One is your air screw. The other adjusts the slide up and down. Back out the middle one!1sttimer said:Is air screw the protruding screw or the recessed screw.
I set both at 1.5 turns out
cafe mike said:That's why! One is your air screw. The other adjusts the slide up and down. Back out the middle one!
Air screw is recessed
cafe mike said:Take off your filters and make sure your slides are going all the way down and up at the same time
Yeah the one near the middle1sttimer said:Middle one? There's only two.
cafe mike said:Now as you back that off. Make sure it's dropping down and you don't have your cables too tight
1sttimer said:Took three pushes, fired right up and went right to the redline. Air screw?
1sttimer said:One throttle cable end came out of the brass nipple and pulled the slide up. I screwed it all the way in, and they both rest at the same height.
Now how far do I back it out from bottom?