1sttimer said:Is it normal to have a dent in the float and a little gas in there? Not a lot
teazer said:Not unusual but not good. With fuel in the float, it hangs lower than it should because it has less boyancy and it floods. You need a new float if it has fuel in it.
Texasstar said:You can solder that hole
Sent from my iPhone using Tapatalk
xb33bsa said:you can find the hole by gently heating up the float a match will produce a flame at the leak cause there is gas in there
you must get the gas out as well
soldering them is tricky just buy new ones
The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.1sttimer said:Is it normal to have a dent in the float and a little gas in there? Not a lot
Duchat said:The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.
Edit: my bad. I should have read further.
dutch do you have a little twin?Duchat said:The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.
Edit: my bad. I should have read further.
1sttimer said:Ok thanks Teazer. Wonder if that's the source of the problem. Any thoughts to the valve having some slop in it before the spring actuated pin is depressed? I.e the valve rises about a millimeter before it seats and the pin starts to depress.
Duchat said:Yes I love old honda twins. I have 77 cj360 I'm tinkering on. Also 78 400t that is next and a 65 dream 305 waiting patiently. I can't get more bikes or she'll kill me.
lol my wife wants the motorcycles out of the house...Duchat said:Yes I love old honda twins. I have 77 cj360 I'm tinkering on. Also 78 400t that is next and a 65 dream 305 waiting patiently. I can't get more bikes or she'll kill me.