"Patina" The 1973 CB175 Cafe Racer

Re: "Patina" The 1973 CB175 Cafe Racer

tusege7y.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

I pulled out the valve and lapped the end of it with a little polishing stuff. Lightly chucked it in a drill. Put it all back together and it still does it but not as bad.

Is it normal for the valve to slide up into the threaded screw surrounding it before the float depresses the spring loaded pin? Like, it has some slop before the pin is depressed in the valve.

ujugahu9.jpg
 
1sttimer said:
Is it normal to have a dent in the float and a little gas in there? Not a lot

Not unusual but not good. With fuel in the float, it hangs lower than it should because it has less boyancy and it floods. You need a new float if it has fuel in it.
 
Re: "Patina" The 1973 CB175 Cafe Racer


teazer said:
Not unusual but not good. With fuel in the float, it hangs lower than it should because it has less boyancy and it floods. You need a new float if it has fuel in it.

Ok thanks Teazer. Wonder if that's the source of the problem. Any thoughts to the valve having some slop in it before the spring actuated pin is depressed? I.e the valve rises about a millimeter before it seats and the pin starts to depress.
 
Re: "Patina" The 1973 CB175 Cafe Racer

You can solder that hole


Sent from my iPhone using Tapatalk
 
you can find the hole by gently heating up the float a match will produce a flame at the leak cause there is gas in there
you must get the gas out as well
soldering them is tricky just buy new ones
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
you can find the hole by gently heating up the float a match will produce a flame at the leak cause there is gas in there
you must get the gas out as well
soldering them is tricky just buy new ones

I was thinking of buying new. Buy the time I buy a soldering iron...
 
1sttimer said:
Is it normal to have a dent in the float and a little gas in there? Not a lot
The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.

Edit: my bad. I should have read further.
 
Re: "Patina" The 1973 CB175 Cafe Racer


Duchat said:
The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.

Edit: my bad. I should have read further.

No worries! Thanks for chiming in! That could certainly be my problem.
 
Re: "Patina" The 1973 CB175 Cafe Racer


Duchat said:
The floats should be sealed. If they have gas in them then they will fill the bowl more than intended because they will fall lower than their own buoyancy should allow.

Edit: my bad. I should have read further.
dutch do you have a little twin?


Sent from my iPhone using Tapatalk
 
1sttimer said:
Ok thanks Teazer. Wonder if that's the source of the problem. Any thoughts to the valve having some slop in it before the spring actuated pin is depressed? I.e the valve rises about a millimeter before it seats and the pin starts to depress.

The needle should be free to move 2 or more mm vertically as the float moves, before the tang starts to compress the spring. It has to drop down to allow fuel to pass.
 
Re: "Patina" The 1973 CB175 Cafe Racer

Yes I love old honda twins. I have 77 cj360 I'm tinkering on. Also 78 400t that is next and a 65 dream 305 waiting patiently. I can't get more bikes or she'll kill me.
 
Re: "Patina" The 1973 CB175 Cafe Racer


Duchat said:
Yes I love old honda twins. I have 77 cj360 I'm tinkering on. Also 78 400t that is next and a 65 dream 305 waiting patiently. I can't get more bikes or she'll kill me.

Is love to see a pic of your 305 :) I love the look of those things.
 
Duchat said:
Yes I love old honda twins. I have 77 cj360 I'm tinkering on. Also 78 400t that is next and a 65 dream 305 waiting patiently. I can't get more bikes or she'll kill me.
lol my wife wants the motorcycles out of the house...:) build strings?


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

It's a pile of parts and storage boxes in the shed lol! I have the pics of when I brought it home all those years ago. It had a big hippie flower on the side cover.
 
Re: "Patina" The 1973 CB175 Cafe Racer

Small update...trying to get this thing on the road full time. Bought some CB750 intake boots to use as velocity stacks and covered them with a hacked up uni filter. Performance didn't change with and without the filter, so I feel good about that for some reason. Lots of flow, little restriction from the filter I guess.

uvy3u3y4.jpg


pu7aju6a.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

Also I had bradj cut the hugger fender off his "RD from hell" and sell it to me. Great craftsmanship. Worked and looked so well that I had him also build me a nice fitted battery tray for that stupid small space between the rails.

a3ubumes.jpg


uqata6yr.jpg
 
Back
Top Bottom