Recent content by Cibby600

  1. C

    CB175 Regulator ???

    I don't think running leds will change the output of the Altenator. They will just draw less current. So I would be guessing, still no reg. Maybe an auto elec can chime in here. Cheers.
  2. C

    175 tank dilemma

    You could try and use the guts of your old petcock if you have it, and try and source an adapter to thread your new petcock into where the little bowl screws in. Just a thought if you still have your old petcock. It will still be a hassle to find an adapter though. You may have to make one...
  3. C

    Wiring cb175 manual *color coded*

    SWEET. Thanks bud!
  4. C

    Discontinued Oil Seal

    Get inside and outside diameter measurements and call any big bearing company. SKF, CBC etc. The depth isn't that critical. Cheers.
  5. C

    Heat treating

    Not ALL, and what if you want to make your own bits. I made a few shims up for under my valve springs and did exactly this to harden them. Just good info to know. Cheers.
  6. C

    Heat treating

    Great post. When reheating for the second stage, you should stop when you start to see the coloured / rainbow banding appear. Cheers.
  7. C

    Anyone interested in guitar builds ?

    Yeah even if you don't play, the amount of work and skill involved amazes me. Thought the DIYers here would appreciate it also.
  8. C

    Anyone interested in guitar builds ?

    LMAO. Yeah, MAD skills. I'll attempt one in the future, but the amount of work that just goes in to the neck is amazing! Maybe a CAFE TELE ! 8)
  9. C

    Anyone interested in guitar builds ?

    If anyone here is into guitars, this site has a build challenge where dudes build Telecasters from scratch. Some AMAZING work ! Check it out. http://www.tdpri.com/forum/tdpri-2010-%24210-tele-build-challenge/ Cheers.
  10. C

    Spoked Wheels: Rims & Spokes

    Hummingbird, If you don't take PJ's option, I will go and see Squires next week. I only live 10 Mins away. I'll let you know how I get on. Thanks for the info too, and thanks PJ. You are a wealth of knowledge :)
  11. C

    Help with valves please.

    Looks and sounds OK to me. But best to wait for a reply from one of the 350 guys. Cheers.
  12. C

    Stainless?

    The BEST and neatest way is to TIG it. But it can be welded many other ways. :) Cheers.
  13. C

    Spoked Wheels: Rims & Spokes

    I wll be using them in the future. If you end up using them, let us know. Cheers.
  14. C

    Stainless?

    You can even stick weld with stainless rods.
  15. C

    Can someone with a 72/73 CB350 please give me rough dimensions of their tank ?

    Thanks Charles, looks like the 350 tank might be the go. I can't find a 72/73' 175 tank ANYWHERE. Thanks again for your help guys. Cheers.
See more
Back
Top Bottom