Search results

Currently, I am trying to start my bike using the kick starter and starting spray. i kick it and sparks come out of the exhaust... I am sure it is not a good thing. i'm sure my bike isn't going to explode if i try to kick it over some more but what could be causing this? Some residue in the...

Re: Ground Resistance: Scrub Time Great progress man! you definitely can tell that you are in Texas by the color of that grass! :o haha

Spark achieved! but i decided to leave it at that for tonight. But non the less!! Also, today went and got a mac exhaust, used, but better than the piece i was using. Here is a photo of the Dyna ignition coil mounted: tomorrow is Oktoberfest here at the bars, so i might get it video...

Re: 1977 CB750 cafe project - Cuttin' 'n' Splicin' Alright i did some work today, i started to replace all the bad couplers, replaced about 3 :o ... its hard work haha just tedious. I tested my stator coil, everything was good. just a crappy multi-meter. seems as though all my components are...

Re: 1977 CB750 cafe project - Buildin' on up Project still stagnant, I got a new kill switch off of ebay for $30 bucks that works, hooked it up still no spark... Now I am at a stand still.. Looking at all my connectors or couplers, most to all are weathered. so there is a high possibility...

So that wiring diagram actually works?!?! could you post a picture of the final wiring harness after the cut?

Re: 1977 CB750 cafe project - Buildin' on up Awesome man! thanks for the suggestion that thread helped a lot!

Well good job! I like what you did with the ignition switch.

Re: 1977 CB750 cafe project - Buildin' on up Today i got my new condensers and points, took of the old ones and tomorrow i have to go to the hardware store to pick up new bolts to put them on. I took off my right hand switch to get a better look... from the obvious fact that my starter button...

Re: Project "Ipkiss" (Rolling Chassis) Where did you get that speedo/tach bracket?? looks awesome

Re: 1977 CB750 cafe project - Buildin' on up I got my rectifier... still no spark.. started to dig a little deeper. i took off my condensers to see if that's the problem, but I have no instrument to measure capacitance (farads). I went to my university today to see if they have the instrument...

Re: 1977 CB750 cafe project - Buildin' on up This is what I've been working on the past weeks, I got metal rescue to clean out my tank... worked really well actually. hooked up my electrical put oil in the motor and cranked it (put oil in the motor first of course)... naturally first time...

Rocking lil' ole' Denton here!!

That is freaking awesome!

Re: 1977 CB750 cafe project - Buildin' on up thats a good idea, but i don't know if i am going to do the fairing anymore. I don't know, I am trying to get it running first. I've been on vacation for the past 3 weeks, so i have some catching up to do..

Re: Honda cb360 build Did you get a bill of sale with it? I contest with the others though, get it running first. things i would do first clean the carbs, change oil, check plugs, check for air filters, and check electrical for corrosion.

Re: 1977 CB750 cafe project - Buildin' on up Alright i thinking i am going to scratch the light fearing from the project.. I just dont think it will have that "cafe" look. But maybe get his mask painted on my helmet. Time will tell.. Oil tank is finished but locked up in the machine shop. I...

Awesome man, i replaced my tank as well.. it's just too wide... i don't know what they were thinking for the k7 and k8, looks like the back of beetle sitting on your bike. I like what you did with the oil tank, combining the rear finder with it, just brilliant. Mine that i am developing is the...

Re: 78' CB550k - Project "Ipkiss" FINALLY FINISHED w/Startup Clip!!!!! Looks awesome man, congrats. My thoughts are, the more noise the better.

Re: 1977 CB750 cafe project - Buildin' on up Thinking about making a fairing for my light bulb, it's rough but i think it would look sick.