Search results

Thanks Rich. That's what I was thinking, with as much oil that's leaking, I figured the source would be more obvious. Tonight I'm going to pull the cover and see what's up. I'm hoping it's just the gasket, but luckily if it's the out put shaft I should be able to get what I need tomorrow when...

Hi all, Ive been running my '72 CB350 this summer and it's developed a bad oil leak from what appears to be the seam between the lower crank case and the left side crank case cover. Also, at the same time the leak started it's been increasingly difficult to get it into and out of gears... Any...

Looking sharp! Really digging that tank!!!

http://classiccycleparts.com/ Everything is sold through their ebay store but they seem to have a lot of items, even some stuff I've has difficulty finding. Tim

I'm sure there is a really good story behind that pic. ;D ;D ;D ;D

Too good to be true :o What's on the side of the garage that were not seeing? ;) Seriously though, very nice work!!!!!! I have garage envy......

DrJ, your ability to ALWAYS find info on any given topic, or answer ANY question is slightly disturbing. ??? Although VERY fascinating at the same time. I'm intrigued! :o Keep it up! ;D ;D ;D

When it comes to opinions, everyone has one. That's not a bad thing, I plan asking for them as my build progresses. But remember the most important opinion is yours.

This is the set up I used, follow the directions and you can't go wrong.

I used electrolysis on my headers and will be using it on my rims, works great! It's slow (2-3 days), but the parts can be in the electro bath while working on other things. My advice, get the biggest electrode you can, I used an industrial sized vegetable can, also, the more amps the faster it...

First off, thank you all for all the input you have provided, I appreciate the fact that I can post a question that has me stopped dead in my tracks and get multiple possibilities as to how I can overcome my road block. The fact that other people are willing to take time to reply simply because...

Re: Merry Christmas-am I sick? Cheers!

Nice work polishing! Looks great.

Since funds are so limited, first I'll try to get the chain off without cutting it, and do the best to save the engine. I appreciate every ones input!. Unfortunately rocking the bike back and forth isn't an option as it is completely, and I mean COMPLETELY, torn apart. Wish I would have thought...

Re: my cars... (1965 Mini Cooper S, 1964 Impala, 1994 Integra road race car) It's a MINI, you don't need that much space!

When you say take a dremel to the chain, do you mean cut it? Also, an impact hammer with grinded down what? I think there is a missing word. Thanks Imoale, been following your threads, might need one of your tensioners! Tim

HOLY SH!T!!!! Way more impressive than all those drifting vids out there. Excellent find.

LOL! I noticed that too. Maybe it means it sits on his head "good".

Thanks guys! The hot oil didn't work, I'll try PJ's trick next.

+1!