Search results

Stock length or shorter would be ideal. I just need something that doesnt have a lot of give. Im not concerned one tiny bit about ride quality here I just need to keep my tire off my frame. The lower shock mounts are getting moved forward so that will help some but its not going to completely...

Ive found a lot of threads about folks gearing longer for better highway cruising but haven't really found anything on shortening things up. I don't need nor want my bike to go 100, I want it to rip around the city streets. Any of you fellas running shorter gearing on a little Honda twin? What...

I have searched and searched and I am not coming up with a clear cut answer. Does anyone know if there is a 36 spoke 21 in rim that will lace up to a cb360 hub? The hub on the xl350 appears to be roughly the same size as my disk brake CB hub but one side of the xl hub uses longer spokes...

So here is the scenario... I currently have the rear rim of my cb360 laced to the front hub for the obvious reason of running wider tires. The plan as it sits is to get another stock rear rim to keep everything even. Im looking at the vintage firestones 400-18 which I believe are the biggest...

Doable? I'm assuming yes but I want to double check before trying to hunt down a rim. Bike is a cb360.

Is this a problem? Photos are after I knocked it down with a wire wheel. I more or less want to see if anyone else has had this issue and what they did about it. I think if I go after it with some WD40 and a wire brush i can get the rest of it.

So about 3 years ago I snagged a 75 360. The plan was to do the whole cafe racer thing which I did but never fully completed it. The bike has been living under a tarp in my girlfriends parents garage for the past year but I just got it moved to a buddies garage to start the rebuild. I don't have...

CB360 K&N Pods Headers with 3in baffles Can you recommend some jets that would give me a good baseline to start tuning at? This will be my first time messing with tuning carbs and im not real sure where to start when it comes to the actual jet sizing. Also worth noting, i know people saying...

DSC_0040 by nateridesbikes, on Flickr Untitled by nateridesbikes, on Flickr and for good measure one of the honda thats been living under a tarp in my gfs parents garage for a year. going to be taking it to my friends house soon to finish it.

My battery is deff not charging. The rectifier is brand new. Can someone give me a checklist of things to look at it. I'm deff not on the wiring a team.

the clutch will not fully disengage. ive got it adjusted to the max and it still barely seems to start pushing the shaft in. i cant for the life of me figure out what is wrong. ive had the case cover off to replace the gasket but i didnt touch the clutch basket. the little bearing IS in the...

are 360 and 350 trees compatible? i snapped the upper tree right before my bikes maiden voyage :'(

Upon removing my case cover I found two loose ball bearings floating around inside. Any idea where these came from? I want to put my bike back together. The bike is a 75 cb360

i cant seem to find a straight answer anywhere. will cl high pipes fit on my cb360? the stock exhaust will no work nor will the mac 2-1 both would run into the rear sets.

how are the people with rear sets hooking up the brake light switch? i figure someone has a solid solution.

how do i go about running the wires with my clip ons? would it be safe to just notch out the underside of the bars so the wires have enough room to come straight out of the switches?

A seemingly simple task is giving me some grief. How do I go about getting the signal wires out of the bars with out going crazy with some wire cutters? Its a 75 cb360 if it matters.

i want to hide my battey under the seat bump but i fogot about this(see photo) and now i dont see how im going to have room to but a battery under there. Any advice would be amazing.

Well Im finally getting to work on my 75 CB360. I've got some Tarozzi rear sets and bars in the mail right now and a short list of things I"ll be ordering soon. The only things I'm stuck on so far are the seat, battery, and exhaust. The seat and battery go hand in hand because I'm going to hide...

so ive been hunting around for a bike for the past 9 months with zero luck. i was finally able to pick up the beauty last saturday. i could not be more stoked on it. i just took it out for its maiden voyage in 30 degree weather. cant wait for the parts to start rolling in. 1975 cb360