Recent content by dshricci3

Hi Guys, Has anyone inserted pvc spacers in their cl/cb 360 forks to stiffen the springs? If so, what size diameter and length did you use please. Thanks in advance! -D

True Craftmanship!!!

Thanks Man, now we're talkin' No mods, , I haven't done the chop but plugs come out greasy black after a few minutes. I did the timing with a bulb, is the strobe that much better (just asking)? If it is, I'll go borrow one. I just adjusted valves again, they were real close to spec. Thinking of...

Thanks for the reply. I say this next part respectfully, Jesus is my Savior so I do appreciate you mentioning Him. I've gotten some great advice from this site and I buy parts from the sponsors. I do appreciate your's and everyone's time very much. I don't have the experience yet to offer...

Hi, Tried everything but right cylinder is backfiring and the more gas you give it the more it breaks up. Everything is cleaned and adjusted, timing, carbs, valves? Pilot screw adjustment does nothing to help. Greatly appreciate your help guys! -dshricci3

Hi, Here's more info... I just got it running after finding it literally in pieces in a backyard. All stock, it idles nicely though when I turn the pilot screws to adjust the carbs there isn't a dramatic high rev point? Does this help? And thanks! -D

Hi Guys, Any Ideas Please cl360 bogs when throttled? Everything elec/gas/valves is adjusted/cleaned, I just don't have an idea. Thanks -D

Thanks Dustin. -D

Hi Guys, Anyone have any luck using used Mikuni Carbs on a cl360? I see them on Craigslist for Kawasaki and other bikes. I was wondering if using any 28-32mm carbs might work. I appreciate your help in advance. -D

Thanks Man! So, no re-jetting needed because you kept the o.e.m. air filters and boxes, NICE!!! I think I'm joining you! -David

Hey, Can you please tell me which DCC (the lenght) mufflers you put on. I have a CL and am considering going with the slash cut 16 I will keep the stock intake boxes". Thanks -David

Hi Guys, Could one of you help a brother out and let me know which jets to buy for a '75 CL360 with Keihin carbs if I run pods and 16" shorty mufflers. I would so greatly appreciate it! Many Thanks in Advance -dshricci3

I Thank you sooo much for saving me the time and trouble! I knew someone more knowleagable had thought and tried to mock it up. Respectfully-Dshricci3

Hi All! Has anyone put 450 heads on a 360 to increase performance? -D

Ok... so I NEED your help electronic Gurus! My '75 cl360 has dual filament blinkers/running lights. The front sets have two wires each that connect to one connector each, that is it's like the left light has one wire and the right has one wire because both of these lights two wires go to a...