honda53rider
77 XS400,73 SL350, 73 RD350
That looks like a good deal $50 for some more spark! and how did you remove the starter on your bike? Iv done some looking around and everyone is saying you have to split the case to get it and the chain out. Then you need to make a custom plate to cover the hole.
Well now for some pic of my progress on the bike!
To start i went out and bought a new grinder, only about $40 but its worth every bit of it. I used it to chop the frame and grind down some tabs and clean up the frame.
I am probably not going to use the skate board as a seat but in going to do something that will look very similar.
Then i got the front caliper from the Xs650 in and rebuilt it.
After working with it for a while i got the cylinder out. It wasn't perfect had a little rust but i got it cleaned up and shiny!
I also brushed the plate for the caliper I think it gives it i nice look.
Another thing the UPS man brought me was my new tail light, its a cheep-o smoked led but it will be easy to hide and wont stick out on the bike. Haven't mocked up hot i want it yet but ill be getting there soon.
I also chopped the exhaust for now im running headers but will one day out a modern sport bike muffler on it with some black header wrap.
Then I decided to pull the whole front end off the bike just to clean it... not a grate idea
Im trying to get the rust off the fork legs and brush some paint off.
Then i brushed the whole top triple tree clamp.
I think the work was well worth it!
But i did brake off the cracked face plate on the speedo
So I have the speedo here with me at school and im going to try and fix it ill have pic on the soon but haven't started yet.
And here is how the bike sits now(i also dropped the front a little more then 1" and adjusting the rear shocks preload down witch dropped the bike about 1" in the back.) It feels really good to sit on and its a perfect height
Well now for some pic of my progress on the bike!
To start i went out and bought a new grinder, only about $40 but its worth every bit of it. I used it to chop the frame and grind down some tabs and clean up the frame.
I am probably not going to use the skate board as a seat but in going to do something that will look very similar.
Then i got the front caliper from the Xs650 in and rebuilt it.
After working with it for a while i got the cylinder out. It wasn't perfect had a little rust but i got it cleaned up and shiny!
I also brushed the plate for the caliper I think it gives it i nice look.
Another thing the UPS man brought me was my new tail light, its a cheep-o smoked led but it will be easy to hide and wont stick out on the bike. Haven't mocked up hot i want it yet but ill be getting there soon.
I also chopped the exhaust for now im running headers but will one day out a modern sport bike muffler on it with some black header wrap.
Then I decided to pull the whole front end off the bike just to clean it... not a grate idea
Im trying to get the rust off the fork legs and brush some paint off.
Then i brushed the whole top triple tree clamp.
I think the work was well worth it!
But i did brake off the cracked face plate on the speedo
So I have the speedo here with me at school and im going to try and fix it ill have pic on the soon but haven't started yet.
And here is how the bike sits now(i also dropped the front a little more then 1" and adjusting the rear shocks preload down witch dropped the bike about 1" in the back.) It feels really good to sit on and its a perfect height