Post a pic of your latest purchase

[irk miller]

Cool, the one I was lookig at was 2 stage and 35 CFM at 90 psi so a little more oomph. It was also 220 so would have meant some wiring changes in garage too.

Yeah, I was already $5k deep on the equipment this was needed to run and 5hp/10 - 15cfm are my minimums. 230v/30a is the voltage requirement which means I will just swap between my kiln and this on that circuit so I don't have to pay a dime towards electrical for a while. At least until I get sick of unplugging my kiln. I run that kiln once or twice a year, since I have work kilns, so I doubt it will be much of a deal.

 

[Maritime]

Picked up this tonight. Small box but 213 usd worth of needed bits to get the gl up to perfect again.

 

[Hurco550]

Picked this "chunk" of xr400 for an upcoming engine swap/ build.

Sent from my SM-G920V using Tapatalk

 

[Maritime]

looks complete engine wise. What are you putting it into?

 

[Hurco550]

looks complete engine wise. What are you putting it into?

http://www.dotheton.com/forum/index.php?topic=76940.msg928837;topicseen#new

 

[irk miller]

I got this CB350 for basically nothing, with just the stipulation that I do something cool with it.

Sent from my iPhone using Tapatalk

 

[trek97]

I got this CB350 for basically nothing, with just the stipulation that I do something cool with it.

BOSOZOKU that bitch!

 

[irk miller]

383 stroker kit for my truck.

Sent from my iPhone using Tapatalk

 

[Tim]

1970ish MTD Trail Flight with a Lifan 196cc motor (just under the 200cc limit for Small Bore )

Runs strong - I'm putting a torque converter on it. It had one originally, but for some reason it has been replaced with a slip clutch and a sprocket on the end of the jackshaft. Hoping a cheap aftermarket torque converter kit bolts right up.

Will replace the shocks all around as well I expect, but need to bounce around on it a bit to see how they are.

Needs a rear brake cable, twist throttle, exhaust, but aside from that it's solid. Very cool front fork setup.

Barber Small Bore June 2020!!! Get yourselves on some small bikes and be there for some creek bottom races, drag racing, general hooligan nonsense not normally seen on Barber grounds.

 

[Sonreir]

Well that looks like fun!

 

[J-Rod10]

Down in Austin for F1. Black's BBQ was up first this weekend.

Sent from my Pixel 3 XL using Tapatalk

 

[Luugo86]

That BBQ looks incredible man.. holy shit

 

[J-Rod10]

That BBQ looks incredible man.. holy shit

We raid the BBQ joints when we come down for MotoGP and F1. Black's is good. Kreuz Market, Smitty's, and Chisholm Trail are all within 1.5 miles of each other. All you'll see on the food channels when they do BBQ bits, and a bit further away is The Salt Lick. Best brisket you'll ever eat.

 

[grandpaul]

We raid the BBQ joints when we come down for MotoGP and F1. Black's is good. Kreuz Market, Smitty's, and Chisholm Trail are all within 1.5 miles of each other. All you'll see on the food channels when they do BBQ bits, and a bit further away is The Salt Lick. Best brisket you'll ever eat.

You can go to the BBQ equivalent of Taco Bell, they're called "Smoky Moe's", and get some of the best BBQ in the state. They are all over the area.

Anyway, if you'll be here after the faces, give me a holler. I'm fishing till Sunday, but home sunday evening on...
9 five six 23 one 6 eight seven 1

 

[sav0r]

I've been trying to make it to Austin for F1 for years. I went several years at Indy. Lately it's been racing obligations that conflict with it and I can't ever get out there.

 

[J-Rod10]

I've been trying to make it to Austin for F1 for years. I went several years at Indy. Lately it's been racing obligations that conflict with it and I can't ever get out there.

It's a blast.

They had a bit over a dozen 70's F1 cars racing today, and another race for them tomorrow. They are awesome.

Had to grab some Que to bring home. Be 'til MotoGP until BBQ this good will be had again.

Sent from my Pixel 3 XL using Tapatalk

 

[SONICJK]

Traded my xt250 for this guy this morning.
I didn't really get the upper hand in the trade but I'm fine with it. Wanted another middleweight thumper for heavier dirt work than I feel comfortable on the bmw.

 

[Hurco550]

Traded my xt250 for this guy this morning.
I didn't really get the upper hand in the trade but I'm fine with it. Wanted another middleweight thumper for heavier dirt work than I feel comfortable on the bmw.

I like that earlier gen dr650. Thatll be a good and faithful steed

 

[irk miller]

I would take that DR650 in trade for an XT250 any time, any day.

 

[SONICJK]

Yeah XT250 is a turd. I've always hated that bike.

Yep I prefer the early gen on the DR, it's not as nice a bike but I love the look. This one's a 1990 so very little aftermarket. Guess I'll have to make a bunch of stuff for it!