Re: Project "Caroline" CB350four (Angle Grinder & Cutting Wheel)
It has been a while since an update, but I have not stopped working! I have been quite busy, but I can only work small amounts of time at a time. I got in the shop today and finished several things I had started.
First up is the polishing of the fork lowers. I spent a good amount of time working on them to get all the piting out and remove the casting marks. I am pretty pleased with the result. first is one done compared to one that I have not worked yet. Second pic is both done and showing some bling in the sun.
I got the engine out of the frame:
Then went to work on the frame. I cleaned up the area where I removed the passenger peg mount from the left side of the bike.
I removed the center stand and I am still working on cleaning that up. I also Removed the stock brake lever mount.
As for the other passenger peg mount, I am leaving it for the exhaust hanger, so I modified it. It does not need to be as strong to hold up the can, so I lightened it up some, and more lightening will be done later.
I also wound up really dirty, and Amy sent me straight to the shower!