Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Here is the license plate and tail light mount. It's hard to see, but there are two 1"x1/16" bars supporting it from the bike. I tried one bar and it flexed too much, so I triangulated it with a second bar.
Here is how I mounted the Benelli tank. The bracket is for mounting a light on a Harley fork.
Is there a good reason you have mountrd the shift linkage underneath the footpeg? Tarozzi rearsets normally runs on the upper side giving more space to the exhaust.
I'm not sure about the break side, it may be the only option running drum brake? And it may not br an issue depending on which exhaust you go for
The black one doesn't seem to serve any purpose.
I don't have the headlight hooked up yet, how do I wire that in to the relay? I want it always on, no switch and right now no high beam.
I put the shifter on the bottom as it did t matter when I mocked it up. There is plenty of room. I plan to use this exhaust but with different muffler cans.
I think it is better on the bottom, it won't be in my way.
The brake side is different. There is no way to put it lower as it will foul the brake shaft. I need to change out the bolt with something that will not stick out as much.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.