Texasstar
Can't is a four letter dirty word
Thanks Pat! When we put the Skinny Peel on it will stay on...until we need to change motors or other things we can't get to My son doesn't want to do a two into one. He likes the scrambler exhaust so we will see what happens with the Peel. He wants to go with two short cones like this CB.pacomotorstuff said:The "skinny" Peel fairing is a great addition to your bike, but unless you're keen as mustard about unbolting the front forks and wheel every time you so you want to get the fairing off, you'd better look at modifying it like Bill Anderson's fairing - ie, make a nose and belly split.
I didn't look too closely at the vid so I don't know for certain what Bill did under the lower fork yoke, but I modified my fairing mould so it's a 3 piece - a nose, a belly and a little "T" piece, all with joggles at the marryups to allow the fairing to be Dzus-fastened together just like a modern fairing.
I haven't read all of the posts on this thread, but when I looked at your 2-into-1 exhaust system lashup, I wondered how you were compensating for the fact that the right pipe is around 5 inches longer when the exit ends of the pipes are at the same point - the right side header has to travel a lot further to get to the left hand side, right? I'm fighting the same problem with my CL175 twin (street bike) - I want the head pipes the same length. In my case, I'm using two separate mufflers so not that big a deal except for the stagger on them looks a little odd - so maybe a balance tube?
You 2 have done an outstanding job on this project - incredible amount of work and detail. Beautiful.
Pat.
The first goal is to DO THE TON with less. So we are almost dialed in with a basically stock motor as Teazer likes to call his .
We have not ported not are we running a better cam...yet. We have a 200 head coming in the mail to dissect with a band saw.