Texasstar
Can't is a four letter dirty word
lolSonreir said:Does this fairing make my butt look big?
![]()
lolSonreir said:Does this fairing make my butt look big?
![]()
Redliner will do! My daughter has played open mic at Bill's Records...saw the Flaming Lips @ Gilleys, and have had a beer or two at Lee Harveys. Yes we are crazy! Spent 5 hours to find one cl pipe and muffler, we found our cb 750 air box (with velocity stacks) above Larry, Moe, and Curley, found our rearsets off the cbr600f3. I wonder what is up here! I hear guys say, "That place is crap, he won't tell us where it is! He won't let us pull it!" My wife calls his place a mess...my son calls it heaven. Tony knows where everything is in that place...but it is way more fun to find it! Tony's Elsinore, his Suzuki two stoke in the rack in back, His little Kawi...heaven.Redliner said:I live right around the corner from L&L. I walk there and pick parts for mah mates in Phoenix, Austin, El Paso, Cali etc. Funny how mundane the place looks and yet hey, what's that? A complete Elsinore :
You might see me cruising Lamar now and then, testing out whatever I'm working on and showing it off to Tony, who's a great sport.
You two are completely crazy. The fact that you care so much about that 200 says that much. The next time you plan on going that way, maybe stop by and see what I have going on or show me what you've got.
I don't get around much, ATM, since I sold my CB550 and am building a CL350.
Cheers.
teazer said:That TZADS1 anti-draft was designed for Daytona and is worth looking at. I have two on the shelf that need various degrees of repair.
We would be there tomorrow morning if this school stuff didn't get in the way...cheers Redliner and give a big yeeee hawwwww yell for me when you ride the GSRedliner said:Oh, did he tell you that the red GS1100 is his? I may have to twist his arm and lemme take it out. Suh-weet as!
Sometimes you get lucky. I needed a new upper triple for a CB450. They had no 450k's or 500t's laying around, but what are the odds? There's an upper triple already pulled and just sitting on one of the shelves in the far end!
The parts selection is always changing and you never really know what you'll find, but you must be persistent. By now I have a pretty good idea where each bike is and in what condition ;D
Our cb200 five years ago at 45 secondsRedliner said:Oh, did he tell you that the red GS1100 is his? I may have to twist his arm and lemme take it out. Suh-weet as!
Sometimes you get lucky. I needed a new upper triple for a CB450. They had no 450k's or 500t's laying around, but what are the odds? There's an upper triple already pulled and just sitting on one of the shelves in the far end!
The parts selection is always changing and you never really know what you'll find, but you must be persistent. By now I have a pretty good idea where each bike is and in what condition ;D
Texasstar said:Teazer,
Will the TZADS1 fit over the rear shocks on the 175/200 cleanly or will it need to be modified?
hopefully..one day that long gap is going to be filled with an aluminum tank that our buddy Junior Burrell is going to teach Zeke how to build...form will follow function...it may be smaller than our existing tank...Did you know there is no 175 streamliner BUB record? Now that is a big gaping hole that someone should fill some day. Can't be more than .50 over on the engine...teazer said:Just.![]()
I don't have a CB200 frame here but I just put an anti Draft seat off a TZ onto a CB160 and it clears the shocks nicely. It is somewhat wider than the frame at the front of the seat and obviously it sits back where a race seat should be and that leaves a long gap to the tank, but those are just details.
Redliner said:LUL, inches :
Anyway, it looks like you're measuring the rocker. Wouldn't that give you valve lift? Unless those rockers are 1:1...
Curious.
Sonreir said:Looks like he's measuring from the top of the retainer, to me. But that measurement value would also include the lash adjustment.
But anyway... that isn't much lift at all. :-\
Redliner said:So he is basically measuring the valve?
I can't comment on the lift. Inches to me are as made-up as "heaps", "a helluva-lot" or "a tad".![]()
Sorry guys I meant valve lift. Take a look at the megacycle cams for the 160, 175, and 200. These are competition cams.Redliner said:Thanks for making me do math
5mm?? I think those jobby chinese engines like the 50cc GY6 have lift like that!
Are you certain you know how to use a dial-gauge? I'm just commenting from the sidelines, not being rude ;D