Search results

At the end of last summer, I installed new Dyna coils, a Bore-Tech electronic ignition and a Rick's Motorsport Electrics charging coil. I followed the instructions for each component and wired everything back up the way it looked when I started... with the new components installed. The days were...

I am looking for an UNBENT brake pedal from a 1972 CB350 or CL350. All you cafe guys who switched to rearsets should have one kicking around. Need ASAP !

I had my shifter off to access the engine panels and went to reattach it. I overtorqued the nut that holds on the shifter arm and the whole threaded part snapped right off. It is the threaded part of #11 . I am at a loss to figure out how to fix it. HELP!!

Stay safe http://youtu.be/CbTZkZTYkaM

Does anyone else have a bipolar relationship with their bike? There are times when I am so proud of it and want to shine the shit out of it. Then there are times (like now) when I want to pour gas all over it and set it on fire. My bike has been "under re-construction" for most of the...

I have decided to get some new coils for my bike. I am going with Dyna and am trying to decide between the 3 ohm (DC3-1) and the 5 ohm coils(DC10-1). I will be using them with an electronic ignition. The instructions in the ignition kit say you can use 3 ohm coils with it. What would be the...

Today was restart date for my bike(72 CL350): Work done: 1) Carbs disassembled, thoroughly cleaned all brass replaced (everything), new floats,new gaskets,float levels set with micrometer to manual specs 2) New OEM airfilters all boots done tight. No signs of wear in any of the rubber parts...

I recently rebuilt my carbs and bought a couple fuel filters for my lines I did a quick google search for the line size for my carbs (CL350 /722A) and came up with 1/4" . I bought the fuel line and it fits the filters well. The line is larger than what I had previously. It fits ok on the...

I spent the day doing the valve adjustments on my CL350 yesterday. It was easier than I thought and harder than I thought at the same time. I had the hardest time doing up the locknut for the adjustment without overtightening the valve clearance. I would have the feeler gauge in there with the...

You know it... the guys that have the best parts fiche online! I busted off the brass nozzle on my carb float bowl. I ordered up a new one. In less than 4 days I had the part at my door. It was still in the FACTORY BOX! It still had the new "oil-on-a-puddle" zinc finish on it. WOW !! Super...

I am a bit confused if I have reassembled my exhaust properly. I have seen diagrams that have conflicting information. The way I have reassembled it is with the parts going in this order: 1. Insert Pipe (5) into motor. 2. Place collars (2) around pipe 3. Thread flange thru bolts then tighten...

Mmmmm... Italian cafe sexiness! SP 1000 frame, V11 engine/ Le Mans transmission., tuning by HTMoto, 1040cc, 95hp, 388 lbs (dry) Images: Bike Exif http://www.bikeexif.com/moto-guzzi-kaffeemaschine Bike builder: Kaffeemaschine http://www.kaffee-maschine.net/html/en/html/machine6_1.php

http://www.nrp-carbs.co.uk/ This is a company based in the UK. I place an order for 2 Keyster CB350 deluxe carb kits KH-1200 on Monday afternoon. I was ASTONISHED that they we sitting in my mailbox today (friday)!!! I live on the west coast of Canada ... so they had to travel a long ways. I...

The Patient: 1972 Honda CL350... stock everything ... no modifications The symptoms: -starts easily cold. Will not start with choke engaged. -didnt idle well from time of purchase. Idles slows then dies - first time I started it... old dude in...

I am looking for a tank like this: No rubber side covers. I would like one in good condition. NO DENTS.... crap paint ok.

The forecast is for rain this weekend. :( I have decided it's time to install the Pamco electronic ignition I bought. The directions call for pulling off the gas tank. Is there anything special I need to know about doing that? It still has fuel in it. I also need to set the timing. I bought a...

Love this video! http://www.youtube.com/watch?v=PWkQTbR_-xA

I have a 72 CL350 that I want to mount the MAC exhaust 2 into 2 exhaust system on. It is a CB350 type mount. Is there going to be any problems... or is the frame exactly the same for the cl350 and cb350 Also, I know that the carb is jetted for the CL pipes. Do I need to get a new set of...

I want to check my air filters on my 72 CL350 but I can't get to it because the scrambler exhaust is blocking me from removing the cover. I looked at the shop manual and it says that " the muffler must be removed first" The instructions for the muffler removal seem confusing to me. Do they mean...

I went riding today and my bike is running kinda rough. It's fine when it's idling. When you accelerate it feels like it is hesitating and rough. Instead of Whaaaaa/Whaaaaa/Whaaaa ... it's Whaaa_cough_aaaa/Whaa_cough_aaa_cough__aaa. Overall, the engine just feels rough. It was so bad today, I...