Search results

Hey! I am looking for an after market speedo for the cl 90, as I can no longer use the OEM one due to the change up in the headlight bucket. Its not apparently not common knowledge. Honda of Hollywood said they had no idea, and North Hollywood Honda said " We can give you a speedo but...

I need the set of springs as mine are worn and making for shitty throttle response. Thanks. Cash in hand.

Hey! I have a 1970 CB350 twin with pods and jetted, I soaked the carbs over night, put it all back together, starts first kick but when I crank on the throttle it tops out at 3 grand and sputters a bit..... Am I just getting too much fuel or what? Thanks in advance. :)

I have a 1967 CL90 with a single carb, I've cleaned it twice, pilots clean, soaked everything over night, blew it out with compressed air. I set the pilot screw back 1 1/2, it idles fine with the choke open but as soon as its closed it dies. I checked the the gas flow from the petcock, checked...

So I picked up a CL90 got it running.... The issue is that when I start to release the clutch it moves and when its fully released it dies on me. I've got a touchy clutch on a few of my bikes but this doesnt seem right. Is there an adjustment that needs to be made or am I just f'ing it...

I got a 1978 kz750 on a trade from Nevada and it hasnt been reg' for about 2 years. Will I need the old registration when I go to the DMV or is the title alone enough? Thanks.

I just got a 78 KZ750 twin on a trade and I've got it running, but the issue is that I have to keep the choke halfway open even after it warms up, when I hit the throttle it bogs down and occasionally backfires. If anyone could help me out with some troubleshooting ideas that would be awesome...

First bike, and first bike restoration. It was fun and I learned a shit load! Time for another one? Before and After.

1972 Plymouth Valiant 318 Car seat and all.

I've see quite a few cafe bike that chop off the headers and tuck them under the engine. I like the look but I wanted to know if it would effect the performance of the engine adversely? Its not going to be a highway bike, just fyi. I've looked through the searches and it seems to be a bit of a...

1970 CB350 I am installing a new kill/headlight switch and could use some help. I'm a little color blind (no joke) so the wiring diagrams I've looked at arent too much help. I have the right side handlebar wiring cluster consisting of 9 wires 2 black 1 black w/ white stripes 1 white 1...

I have a '70 cb350 twin and have ditched the push button start and the turn signals so I have no use for the bulky throttle housing. I have new clutch and brake lever set but dont know where to go from here. Any help would be greatly appreciated. Photo is attached.

I have a 1970 cb350 twin that I'm building, no signals, kick start only, and LED tail light. Has anyone used the turntech batteries before? Can I use the 2.5Ah, or do I need a 5Ah? Thanks in advance.

So I ordered a rectifier from Oregon, and the Interceptor seat from Roc City and I'm trying to figure out the best battery to hide under the seat. Any thoughts would be a great help.

This is my first bike project and I was bagging and tagging all my parts when this part fell out of somewhere and I dont know what it goes to. Help? Thanks in advance.

This is my first build and I have the bike stripped down, bagged and labeled. All the bolts are out of the frame, I would assume I would just muscle the engine out of the frame but I figured I'd ask to save some time and energy. Thanks in advance.

Hey Everyone, This is my first street bike (ride dirt), and my first bike restoration. I've got her safe and running smooth, so now I'd like to modify. The biggest trouble I've had is finding a battery I can hide and still have a head light and tail light. In the photo...