Thanx for the comp phx, but I keepin the blinkys I got ;D
Update on the rear sets.
The brake side is just about done. Made a big adapter plate that bolted to the stock foot peg bolt and the smaller bolt behind it. Then bolted the rear set to the plate. Makin a mounting tab to put the reservior on the back of the frame, just behind the side cover.
The brake pedal itself is going to have to be bent / formed a little to get out past the pipe. The kick starter is also going to have to be bent a little to give it enough room to get past the foot peg. (The stock footpeg is still there in the pic, gonna zip it off and use the bottom portion of it as the spacer behind the adapter plate). Yeah, Yeah, someone had a friggin left side foot peg on the right side rear set, will have to change it out.
On the shifter side it will take a little more fabbing since there are not ready made mounting holes. Pretty much the same set up though, Mounting plate welded to the frame, rear set bolted to that. Gonna have to do a little fabing on the shifter lever and make the linkage attach over the shifter pedal and over the shifter shaft rather than under. No room on top of the pipe for the linkage. Also gonna have to lengthen the linkage rod a little.
Just sorta balanced there, nothing done yet.
Yeah, Yeah, I am not doin the work on the rearsets, gettin help...... F-off!!!!!!!!!!
As Dirty Harry Callahan always said "a mans got to know his limitations"