Search results

Well had my bike out for its first real ride tonight and got it up to temp. Along with the build I also did all new gaskets and fresh rings/hone bead blasted pistons and stone ground gasket surfaces. Base gasket seems not bad a little sweating but looks normal. Head is leaking in 2 spots. Both...

Any harm in this? I know the 9 is a colder plug just wondering if it will hurt. Bike seems to run much better on 9s vs the 8s I am running mikuni vm30s. pods. Straight pipe 360 headers. Thanks Dustin Sent from my SGH-I337M using Tapatalk

After fighting around with the DIY throttle cable(how frustrating) i gave up and ordered a CB175 cable everyone said works and is pre assembled. Problem is the two ends that attach to the carb seem to be too short? they were hard to compress the spring and get trough the slides and now they...

Does anyone know if the brand Genius makes a charger that can charge my 4 cell Antigravity. I know antigravity sells the optimal brand chargers but locally they are about $190. Genius is also sold locally but the have some cheaper models. Does anyone know? http://www.geniuschargers.com...

I really hate to have to write this but I just feel the need to. First off I will say this is not just the motorcycle industry. I experience this in the snowmobile industry and automotive world (less so) regularly. 1.Knowledge of the parts counter they are working is usually zero to none. I...

Before i put the rocker cover on i want to make sure i did this right. its my first time taking a bike motor apart. 77 CJ360 Generator mark is at LT. both lines on cam gear level with head and then screwed cam into gear. correct? also is my chain tension-er on proper? the manual...

QUIZ- Who knows what bike it is? http://www.youtube.com/watch?v=8_TTrT61z6k http://www.youtube.com/watch?v=p3koj9BvYrU

Due to recommendations on here from other members I decided to do my base gasket as well while I was doing my head gasket. My motor was running fine when I took it apart and I thought it was stored well(about a year) but it appears maybe not as it seems one pistons settled pretty good. when I...

i just finished doing my head gasket and in the process painted my motor i also replaced all of the gaskets except the base gasket. just wondering if i should be putting any sort of sealant on these? i have heard mixed reviews from people. obviously not putting anything on my head gasket but...

Well my bike was running all good but I took it apart recently to do gaskets and paint the motor(also ordered new Points), this ended up turning into a bigger build, gutted everything, and along the way i purchased a 4 cell antigravity battery bike is a 1977 CJ360T Bike has stock headlight...

Well I have owned this bike since October of 2010(paid $200 for what you see in the first few pics after I cleaned it up), put about 1000 miles on it and last spring I took it apart to change a leaky o ring on a head stud and head gasket. While it was apart I bought another project car(1994...

whats the best size of shorty's to lower the rear? i think i may head to the motorcycle wreckers and measure some out off another bike.

I find that finding things specific to the CJ360 are allot harder than the CB360 so I am just wondering if these carb kits will work for rebuilding my stock 759A carbs...

title states it, looking for a camshaft from a cb360 that has no pitting or damage and also lookin for two rocker arms with no pitting or damage PM or email duggyb AT gmail dot com

what do you all think of this, two of my lifters?rockers? have some pitting and damage and also my cam on the 2 corresponding lobes has some small pitting and damage, cams looks very small and minor but the other stuff on the valvetrain end had serious pitting on one and minimal on the other...

Well guys i have a pretty minty 1977 Cj360T and i didnt really want to ruin the all original paint and such but wanted a color change, so i started wrapping it with 3m scotchprint material, i dont have much done as i just started this morning, but it should all be done by early this week. i...

Im sure most of you have seen the Bell Custom 500, but for anyone that hasnt i snagged this one today brand new off a guy locally here. gunna be adding some vinyl to it later tonight as well.

i got a chance to snag a set of Mikuni 30s off a snowmobile(380F) for $60, just curious if they will work on my 77 360? i understand they need a rejet, and a manual lever choke and new throttle cable/pods but DCC wants $335 for the whole package and i could piece it together for much less!

so i rode the bike like this last year because i didnt want to tear into it to deep, but the previous owner had welded a tractor muffler on the 2into1 and it looks really hideous, will i do any harm to the bike by just cutting off the muffler and having it come out straight? its pretty loud as...

http://cgi.ebay.com/ebaymotors/Honda-CL-CL350-Scrambler-Honda-CL350E-barn-fresh-original-paint-scrambler-pipes-great-shape-rare-/251039299048?pt=US_motorcycles&hash=item3a731bb5e8#v4-41 seems like a nice bike.